The main working principle of oil-fired steam boiler is a kind of heat energy released after the combustion of fuel or the waste heat in industrial production is transferred to the water in the container, so that the water reaches the required temperature or a certain pressure steam thermal equipment. The oil boiler operating principle is easy to understand. The boiler is carried out in two parts at the same time: “boiler” and “furnace”. After the water enters the boiler, the heat absorbed by the boiler heating surface in the soda water system is transferred to the water supply, so that the water is heated into a certain temperature and pressure of hot water or steam is generated, which is led out for application.
In the combustion equipment part of this series of boilers product, fuel combustion constantly gives off heat, and the high temperature flue gas generated by combustion is transmitted through heat. Then the heat is transferred to the heating surface of the boiler, and the temperature itself gradually decreases, and finally discharged by the chimney. With the development of economy and social progress as well as the improvement of people’s awareness of environmental protection, a new type of environmental digital boiler arises at the historic moment. This series of oil-fired steam boiler system is operated by the control system according to the data has been input for the relevant temperature, pressure and other automatic control, so that the system in the specified safety range of internal automatic operation.
The boiler system is also provided with multiple safety protection from the aspects of procedures and machinery. If the system appears abnormal phenomena such as overpressure, the control system will automatically shut down the burner. When the system overpressure reaches the set value of the safety valve, it will also jump off to protect. The oil boiler operating principle is reasonable and easy to understand, the structure is simple, and the rated evaporation capacity is generally not large. This series of boiler products start up faster pressure, boiler water quality requirements are relatively low.
The oil-fired steam boiler belongs to special equipment, the design, processing, manufacturing, installation and use of the boiler must accept the supervision of the technical supervision department. Ensure that the boiler quality is good, low energy consumption, high thermal efficiency, stable pressure, sufficient air supply, economic use. The user can only use the steam boiler by obtaining the boiler use certificate. The burner of this series of oil fired boilers is supplied by the world famous manufacturer, which automatically burns and stops according to the controller instruction. The independent program controller has a number of safety protection, safe and stable performance and low maintenance rate.
The oil boiler operating principle is more complex, mainly consisting of fuel system, smoke air system, soda system and so on. The large evaporation area, improved heat transfer surface and large furnace diameter of the boiler series ensure high efficiency, low NOx emission and low heat load on the heating surface and other structural parts, and all the steel surface through which the flue gas flows is the heating surface. Boiler work, the first fire burning, the fuel into the combustion chamber, under positive pressure combustion, the flame to the bottom of the chamber of a stove or furnace, then return to the built-in high temperature flue gas by the second article turbulent flow of smoke tube bundle to smoke box, before finally, premenstrual smoke box into the third return, after fully low temperature flue gas after heat exchange through smoke box to the flue gas exports.