Gas thermal oil boiler adopts horizontal structure, combustion mode is chamber combustion. Industry thermal oil boilers fuel for light oil, natural gas, city gas, liquefied gas. Flue gas flow is mainly fuel combustion in the furnace, high temperature flue gas through the inner coil heat absorption. The inner ring coil outlet flows into the channel between the inner ring and the outer ring to form the first return. Flow through the channel between the outer ring and the external insulation, forming a second return trip. Finally, the flue gas enters the rear flue through the outlet smoke box, enters the chimney after the heat exchanger, and finally is discharged into the atmosphere through the chimney.

 
This series of thermal oil boiler system is composed of three parts: heating system, combustion system and electrical control system. The auxiliary machine of the heating system is composed of expansion tank, oil storage tank, hot oil circulating pump, oil injection pump, oil filter, oil and gas separator, etc. Combustion system is composed of burner, body and heat exchanger. The electrical control system is composed of electrical control cabinet and its testing and display instruments.

Industry thermal oil boilers operation can obtain low pressure and high temperature hot medium, convenient adjustment, uniform heating, can meet the precise process temperature. Liquid phase circulation heating, no condensing heat loss, high thermal efficiency of heating system. The change of volume caused by heat and release of working medium and temperature rise and fall shall be compensated by technical measures in the system. There are technical measures to strictly control the content of air, moisture and other low volatiles in the working medium before circulating heating.

This series of boiler products make use of circulating oil pump and forced heat conduction oil to circulate in liquid phase and transfer heat energy to heating equipment and then return to heating furnace for reheating. In addition, it can also output two or more different temperatures of heat conduction oil according to customer requirements, so it is widely used in petroleum, chemical, textile, printing and dyeing, plastics, food and other industries, and has been trusted and recognized by the majority of customers.

Gas fired thermal oil boiler heating system is simple, does not need water treatment equipment, reduce the investment. Adopt coil structure, sufficient heating surface, high thermal efficiency. Easy installation, as long as the body and the combustion chamber can be closed. There is an air preheater at the end of the boiler, which greatly improves the efficiency of the boiler. The heat supply is above 300℃, and the general working pressure is below 1MPa, which makes the boiler run safely and reliably. The diameter and length of the radiation coil are suitable for the flame of the combustor to ensure the reliable work and adequate cooling of the coil.

Industry thermal oil boilers size of the furnace is matched with the burning flame, and the radiation heat transfer rate is high. The boiler is compact and saves floor space. Set automatic detection, control, chain alarm prompt in one, boiler operation without duty, save manpower. Zozen Boilers is a professional boiler manufacturer, with more than 30 years boiler manufacturing experience, has a professional R & D design team, can customize boiler service according to customer requirements. Welcome to consult procurement, we look forward to working with you.

Send Message