Fri. Nov 22nd, 2024

In the process of production, the thermal oil furnace should be equipped with certain auxiliary equipment, so the auxiliary equipment becomes a key factor in the selection of thermal oil furnace. Supporting equipment manufacturers are very familiar with their products, know the parameters of their equipment, therefore, especially for new factory customers, listen to the advice of supporting equipment manufacturers, it is very important. In a word, customers of new factories can choose the appropriate products by referring to the model of thermal oil furnace provided by the manufacturer. The selection of industrial thermal oil boiler, first to determine several parameters, a process heat, one is the heat temperature, the other is the use of waste heat. The heat used in the process can be determined in the following ways:

  1. Calculation according to the specific heat capacity of the material to be heated, heating temperature difference, processing amount per unit time to calculate, the amount of heat per unit time is equal to the product of the three, the calculation results and then consider a certain amount of wealth can be used as the boiler capacity.
  2. The sum of heat used by the process equipment can also be used as the basis of heat used.
  3. Increase or decrease based on the experience of the same industry.
  4. If the original use of steam heating, can be converted to the same tonnage of heat conduction oil, and appropriate to reduce the capacity.

 

Industrial thermal oil boiler
Industrial thermal oil boiler

 

The temperature of thermal oil can be determined according to the characteristics of the heating material, and the heat transfer temperature difference can be appropriately considered. The temperature of import and export oil is generally determined by 20-30 degrees. The exhaust temperature of industrial thermal oil boiler is generally high, and there are a variety of use schemes for waste heat. It can be used to generate low pressure steam, or hot air, or to preheat air. When the heat, heat temperature and waste heat utilization scheme of thermal oil boiler are determined, the general thermal oil manufacturer will give you a detailed system scheme. Compare the quality of a system scheme, mainly to see the comprehensive efficiency of the system.

Zozen Boilers produces thermal oil furnace is the third generation of innovative design, using new energy efficient thermal oil furnace instead of steam boiler, can save cost, improve production efficiency, is a good assistant to our production. Thermal oil boiler refers to a boiler that uses heat conduction oil to transfer heat. In general, coal, oil, gas as fuel, heat conduction oil (also known as organic heat carrier or hot medium oil) as the medium for intermediate heat transfer. The hot oil circulation pump is used to force the medium to circulate the liquid phase, and the heat energy is transferred to the heating equipment and then returned to the heating furnace for reheating. It has a high working temperature under low pressure.

 

Thermal oil furnace
Thermal oil furnace

 

Industrial thermal oil boiler adopts liquid phase circulation heating, no condensation heat loss, heating system thermal efficiency is high. The boiler is convenient for operation and maintenance, and is an ideal heating equipment for environmental protection and energy saving. Thermal oil boiler is a new type of special boiler with low pressure and high temperature operating characteristics. The need for uniform and stable heating, and does not allow direct flame heating process heating temperature between 150℃-380℃ in various production occasions can use organic heat carrier heating.
 

Send Message

Leave a Reply

Your email address will not be published. Required fields are marked *