Sat. Nov 23rd, 2024

2TPH 10bar wood chips boiler adopts suitable fuel combustion equipment, which is conducive to the combustion of fuel. Its structure is also different from other boilers. Compared with traditional boilers, the furnace space is larger. At the same time, the arrangement of very reasonable secondary air is conducive to the full combustion of a large number of volatiles precipitated during the combustion of biomass fuel. The feeding and combustion operation of wood chips biomass boiler is very convenient. The boiler is equipped with automatic ash removal device, which can clean up the ash on the heating surface of the boiler in time, and the boiler runs stably. This series of boilers product are equipped with energy saving devices at the end of the boiler. Compared with traditional boilers, the boiler efficiency is higher and the exhaust temperature is lower.

 

Wood chips biomass boiler
Wood chips biomass boiler

 

Biomass fired boiler operation is fully automated, simple and convenient operation, without complex operation procedures. Biomass fuel combustion efficiency is more than 85%, coal is 70%, operating costs are reduced. Wood chip boiler makes use of reasonable grate structure, so that the combustion efficiency is more sufficient. The reasonable design of biomass boiler makes the material not easy to coking and reduces the boiler loss. This series of boiler products can quickly form a high temperature area, the flue gas in the high temperature furnace residence time is long, after several air distribution, full combustion, high fuel efficiency, no black smoke. Biomass boiler combustion is full, smokeless and dust-free emission.

Wood chips biomass boiler furnace arch is made of refractory concrete. The rear arch is low and long, so it burns well, and the flue flue and side wall tiles are made of refractory sintered bricks. The boiler front wall and back wall are made of general firebrick. The boiler series has reasonable grate air distribution, large combustion chamber and strong applicability of coal. Full combustion. Because the high temperature flue gas first enters the settlement chamber, and then enters the two flue flue and the front smoke box from both sides, the smoke and dust removal effect is good.

This series of wood chip boiler running fuel in the hopper through the fuel regulating plate, through the rotation of the drum feeder, spread on the steel screen. By the sieve will be raw coal according to the large, medium and small particles evenly spread in the operation of the grate, so that the fuel into the furnace to form a small, uniform and flat, loose breathable fuel layer. This preserves the clearance between the fuel particles, reduces ventilation resistance and increases ventilation per unit area. The fuel ignition advance, oxidation reaction increases, the combustion speed is accelerated, the boiler output is high.

 

2TPH 10bar wood chips boiler
2TPH 10bar wood chips boiler

 

The wood chips biomass boiler adopts a new curved arm screw regulation structure, so that the ventilation section ratio reaches 1:1 .Flexible adjustment, uniform distribution of wind. Push-pull type sluice cleaning device is designed. The sluice is made of heat-resistant cast iron, which is finished and sealed to effectively prevent secondary combustion deformation and grate air leakage. The boiler grate side sealing structure design is advanced and reasonable to avoid the defects of the side sealing card grate and the air distribution on both sides of the grate is not uniform and burns out the side sealing. Zozen Boilers are widely used in the fields of petroleum, chemical industry, medicine, food processing, large-scale breeding, textile, printing and dyeing, clothing, mineral metallurgy, thermal power generation, etc. Welcome the majority of users to come to my factory to consult procurement!
 

Send Message

One thought on “2TPH 10bar Wood Chips Biomass Boiler”

Leave a Reply

Your email address will not be published. Required fields are marked *